Adding Lights in Pavers | Step by Step Installation of Recessed Lights

This walkthrough covers the entire recessed-light workflow: wire every fixture on the border circuit, snap the proprietary connectors together in the correct order, and test the run before a single hole is drilled. From there we show the safest way to core the pavers and finish with the installation sequence that keeps every light flush even after compaction.

Power and test before you drill Lay the 12-gauge feed in a straight line, add the connector caps until they click, and energize the whole string so you know every light works.

Keep the wiring accessible Stay along the border so future service only requires lifting edge pavers, and avoid compacting directly over the cable path.

Use the right drilling setup Match the core bit to the fixture size, use a water swivel to cool the diamonds, and control flow so you’re not fighting mud.

Set the lights and protect them during backfill Drop each fixture after the hole is clean, use a jig if needed to keep spacing consistent, and backfill gently so the lens stays flush with the border.

Get your landscape lights from https://greenfoundryco.com

Complete Landscape Lighting Training
Design and install lighting that actually works!
We’re excited to introduce a complete landscape lighting training that covers everything from layout and wiring to installation and final night reveal. Learn the full system used on real projects inside Hardscape Mentor

Join the conversation on Youtube: https://youtu.be/lb3fJ6TFfLE